Hello and welcome back for part two.
So now that we have all of the appliances available in the installed appliances list we can build a
topology.
First let's do some changes because I forgot about this.
So we need as we said for adapters for 48 one 1 and I will click OK and four for to get to the same
we need four adapters.
So let's drag and drop all of the appliances 48 one for gate 2 What else.
We said we need two switches so one switch here and I'll drag another switch here.
So for installing the Cisco ISV switches in the topology you will have to go through the lectures in
the in the free course and you will see exactly how to do it.
I said that it's better to do it this way because otherwise I would have created a longer course and
maybe not very convenient for you.
So what else.
We need a Windows B C and we also need an Internet appliance.
So this will help us to connect to the Internet.
Next we will do also the connections.
So if you click on this on this button here you will have the possibility to do the connection.
So the Internet appliance going to for example gigabit 0 by 0 then gigabyte 0 by 0 connecting to.
Now we have four ports.
We said therefore the uplink would use Port 1.
In this case Ethernet net.
This is the mapping Ethernet 0 for Port 1 Ethernet one port to port three and port four.
So Port one here for the the other connection going down port to let's do the same for 48 two.
So it doesn't matter which port on the switch.
Basically we will not apply any configuration on on this switches so port one
port two going downstream.
Let's also connect the Windows machine and now let's connect port three
and port four all together.
So done with the links.
Let's rearrange the topology so that it looks it looks better.
So let's say this is win we can do it by clicking the naming or right click and say change hostname.
So this is land b c land b c.
Again this is let's say switch lam
so switch land.
I'll drag this naming here as well.
This one would be less things or switch uplink and I would put the name again on this side.
This one is so change hostname 48 one
again put it this on this side and this one let's say it's only for Gate 2.
Let's see also the name rings so change his name for this one.
Let's be let's name it only internet.
So I'll show now the names of the ports and make it look good so that I can see and work easy.
So these are the name rings.
It made 0 by 0 0 1 0 first first port to the uplink
3 y 0 2 by 0 and 3 by 0.
Doesn't matter which which one it is here because we know we have connected right.
If you want to check it hold the mouse over the link and you will say like this link from forty one
port Ethernet three go into 48 to port Ethernet three so the correct way would be like this but again
it's just a diagram now we know that we have done the connections right.
So it's like this for the land part we'll need also some IP addressing.
So let us consider like one in two 168 one hundred dot zero slash 24 for everything that's that's here.
So 1 9 2 that 1 6 8 not 100 does zero slash 24.
And this is for the land 1 so text edit let's make it not read it looks good.
Well red so okay.
And apply and okay.
And the land P.S. would be I can do duplicate take it here and let's say that 100 again duplicate and
this one would be da 2 5 4 and again duplicate and 48 2 will be to da 3 nice.
So the the diagram looks good now and we're ready to start the topology so we can do like this one you
can push this these models or start or resume all nodes or you can do it individually.
So right click and hit start.
I'll first start the windows B.C. so start.
And this one is going to start obviously inside inside of VM where workstation.
So up to this point we have Windows 10 genius 3 VM running because we have have integrated into genius
3 or with Jenny's degree.
Now Windows 10 is booting up let's also boot up the Cisco ISV.
So start and start and also the Internet appliance start to more left the victims the 48 victims start
on this one and it is also now booting up here
so forget 1 it's starting and I will do the same for 48 gate.
So right click and hit start for to its starting
waiting for it to turn green in the topology summary
perfect so everything it's working now the links have turn into green meaning that all of the devices
are working and the connections are working as well if you look into the view more workstation so I'll
click home I have now 48 to booting windows 10 it's here 48 1 I will also double click it and I have
it here.
So what else you could do in order to not work with the view more workstation console will you'd have
to right click and go to console or open all the consoles with this button so console connect all nodes
I will click it now and voila.
So for the gate for gate to 48 one internet we don't need this console switch uplink and switch Lan
So everything has booted up it's functional up and running so we're not we are now ready to start the
configuration for the course.
Thank you and see you in the next lecture.