Hello and welcome to this lecture.
This lecture is going to be very simple.
And in order to get things running we need to configure IP connectivity on the windows P.C..
So let's see how we do that.
Let's go on to network settings now.
We have here one Nick card one network interface card.
We click on change adapter options.
Then we go to Ethernet right click and go to properties.
And because we are using IP for Internet Protocol Version 4 we click on it and go to properties.
Now we have decided that we are going to use one end to 168 one hundred so one hundred and something.
So let's say one hundred subnet mask is going to be a slash 24.
And now the default gateway is going to be the 48.
So 1 and 2 1 6 8 100 to 5 4 in order to connect to the Internet.
We're going to need also a DNS.
So let's configure Google DNS.
And now click.
OK close and close these two windows and let's go and navigate to come on prompt so click then CMT enter
and let's see what's the current IP configurations of IP config enter.
And now we see that we have one and to 168 100 that 100.
Let's try in I let's try now to ping the default gateways or the frigate firewall so being 1 and 2 that
once exceed that 100 up to 5 for
so IP connectivity it's still not working or maybe it is.
So in the next lecture we will troubleshoot and see what needs to be done in order for the windows.
The land user to connect to or have connectivity to the 48 firewall and we will do the same for the
40 a firewall in order to see if it has connectivity to the Internet.
So thank you and see you in the next lecture.