Hello and welcome to this lecture in this lecture you will learn how to connect your infrastructure
with a real Windows view machine.
So if you're interested.
Join me now.
So up to this point we have implemented successfully ISV Layer 3 ISV Layer 2 and also a C.
Now let's start and connect the Windows machine.
For this reason I have also configured and installed Windows 10 machine and I would like to create a
new infrastructure a new topology.
So first of all let's do some configuration.
Now if you go in the VM we're heading.
First of all in the advanced local settings you'd have to configure multiple VM net interfaces to say
so we each VM that means VM networking.
So virtual machine networking.
Now I have configured from two to seven so a couple of VM networks and you'll see them here
as you can see.
Now I don't have only the real Nick cards network interface cards.
I also have additional VM.
That's one two three four five.
Up to eight and this happens when you just click on the configure button.
After we do this you'll have to go in the VM more victims and click on new next.
Then select your VM from the VM list.
In this case it's Windows 10 and click finish before exiting.
You have to click on edit and go into network and also allow Genesis 3 to override noncustodial VM one
of adapter.
Please be aware that I have my windows machine turned off now and this is because Janus 3 has to make
some changes regarding to this VM.
So now I click apply and OK now if if configuration is successful you will see the windows machine appearing
in the end devices installed appliances.
And here it is.
So let's create a new project new Blank Project and I'll name it.
Windows 10.
P.S. dot project
so I will just plug the windows APC in and also I will take Cisco rather
and I will just connect them together.
So Ethernet zero going to pick up in zero by zero
let's power on a router and now also power up the windows 10 p.m. and when I do this you will see it
power it power it on in the VM where workstation and it's obvious.
In the meantime let's cancel the router so console we will have to wait until it puts up and then will
configure IP addressing between the windows P.C. the Windows machine and the rudder and try to ping
from one to another and see if that's successful.
Let's see what's happening with the Windows 10 P.C. OK.
This is also powering up
and here it is.
So let's say crafty interface maybe 0 by 0
IP address 10 0 0 1 2 5 5 5 5 5 5 0.
No shut
now before I apply configuration to any kind of windows.
If you go into settings and look in the network adapter you can see that now it has VM net for sine
and it is doing an auto bridging VM with with vehemence Europe.
So let's log in password genius three.
In the meantime
I will start pinging.
Let's say two and repeat one hundred
Okay so going into networking and sharing center
then change Adapter Settings and in the ether net configuration I will go into properties
and IP for settings IP for properties.
Let's see here 10 0 0 0 to 10 0 0 1.
This is the DNS Lillian S..
Okay.
Okay
and also yes let's look into the console.
So now it looks like it's working.
Let's make sure that when I initiate the being from the windows machine the packets are indeed reaching
Aurora so being let's check the configuration first ip config.
So I have 10 0 0 2 I can bring myself okay.
And now I will just being the rather looking into the console I can see now ICMP being so equal place
and source myself going to destination 10 0 0 2 which is basically our self.
So the windows P.S. This is me 10 0 0 2 is the windows b c.
So basically yeah this is the way you can connect your windows real VM machine to your infrastructure
and in the next lecture I will just show you how you can connect your whole topology to the Internet.
Thanks for viewing and see you in the next lecture.