1 00:00:05,930 --> 00:00:08,780 Hello and welcome to this lecture in this lecture. 2 00:00:08,780 --> 00:00:14,380 We will build our first apology in Genesis 3 within a marquis operating system. 3 00:00:14,450 --> 00:00:21,170 So although it's the same as in windows I decided to do a lecture a separate lecture for this one so 4 00:00:21,170 --> 00:00:23,290 that everybody's on the same page. 5 00:00:24,020 --> 00:00:34,490 So I have started a new project VPC s and now I will look for the VPC simulator so the virtual PCs simulator 6 00:00:34,610 --> 00:00:37,340 in the in the staff. 7 00:00:37,340 --> 00:00:39,320 Or in the all devices. 8 00:00:39,370 --> 00:00:44,900 So if you keep your mark almost there you will say browse all devices and I will now search for VPC 9 00:00:45,020 --> 00:00:52,260 s I will add I will use this one the genius 3 VM as a server. 10 00:00:52,250 --> 00:00:55,330 Remember it's the recommended option. 11 00:00:55,430 --> 00:00:59,180 It's the best way to go with for scalability. 12 00:00:59,180 --> 00:01:05,900 I have added to VPC s now I need some kind of device to interconnect them so I'll look for a hub. 13 00:01:05,900 --> 00:01:10,070 This is a non managed device but it doesn't matter. 14 00:01:10,070 --> 00:01:19,850 It will provide us the needed connectivity next if you go to the this button at a link selected choose 15 00:01:19,850 --> 00:01:28,400 your desired Nick card or network interface card again and again and that's it. 16 00:01:28,400 --> 00:01:38,820 We have done the connectivity let's increase the size so that it's visible even on mobile devices. 17 00:01:38,820 --> 00:01:46,530 So after rearranging the names you can show it or make it disappear with this button here in the top 18 00:01:46,530 --> 00:01:47,730 left. 19 00:01:48,330 --> 00:01:49,760 We can now start the devices. 20 00:01:49,770 --> 00:01:51,410 And here is the start resume. 21 00:01:51,420 --> 00:01:55,650 All nodes button so devices are powered up. 22 00:01:55,650 --> 00:01:58,380 We now need to console to the devices. 23 00:01:58,380 --> 00:02:01,650 And this is the console connect all nodes. 24 00:02:01,950 --> 00:02:07,290 So we have VPC 1 and VPC 2. 25 00:02:07,350 --> 00:02:12,050 Let me just increase the size so that it's again more visible to you. 26 00:02:13,330 --> 00:02:21,980 These will be VPC s one and this one VPC s to now in order to test connectivity we have to assign some 27 00:02:22,010 --> 00:02:26,540 IP addresses so for the first one in the left the VPC has one. 28 00:02:26,540 --> 00:02:33,140 We will say IP and let's say 10 0 0 1 slash 24. 29 00:02:33,140 --> 00:02:39,050 Now if we want to assign also a default gateway just leave a space and let's say the default gateway 30 00:02:39,080 --> 00:02:43,780 is any way 1 1 1 1 not on seeing subnet. 31 00:02:43,820 --> 00:02:44,030 Yeah. 32 00:02:44,040 --> 00:02:47,990 We should have done something different. 33 00:02:47,990 --> 00:02:57,700 Let's say this one and on the other side 10 0 0 2 slash 24. 34 00:02:58,490 --> 00:03:00,680 And again default gateway. 35 00:03:00,680 --> 00:03:04,640 Let's say it's the same invalid address. 36 00:03:05,810 --> 00:03:12,950 Yes because we have said IP address and not just IP. 37 00:03:13,100 --> 00:03:18,650 So again 10 0 0 to slash 24 mask checking for duplicate address. 38 00:03:18,890 --> 00:03:24,680 If it doesn't detect anything with the same IP on on the wire it will assign the IP address. 39 00:03:25,490 --> 00:03:33,350 So now we can just test connectivity 10 0 0 2 it's our self and if you want to test on the other side 40 00:03:33,350 --> 00:03:39,280 so the VPC is 1 10 0 0 1 and everything is working as expected. 41 00:03:40,010 --> 00:03:42,770 So thank you and see you in a future lecture.