1
00:00:00,840 --> 00:00:07,230
In this section we're going to get the initial configuration.

2
00:00:07,250 --> 00:00:15,530
So first of all we have to set the good kid dressing if you want to use the firewall in in a lab environment

3
00:00:15,530 --> 00:00:19,370
in production in any situation in the first place.

4
00:00:19,370 --> 00:00:25,280
In the end boxing stays safe so we have to work on the European pressing on the box so that it becomes

5
00:00:25,280 --> 00:00:27,580
functional and reachable in the net.

6
00:00:27,620 --> 00:00:33,300
So this is our first setting the kids racing on at least one sport.

7
00:00:33,800 --> 00:00:37,570
Next we're going to configure and allow access for kids.

8
00:00:38,010 --> 00:00:41,420
As an engineer you don't have that information for granted.

9
00:00:41,660 --> 00:00:49,720
You have to ask questions and ask yourself questions if you're not a live environment structure or so.

10
00:00:49,730 --> 00:00:56,980
So why is this also important to allow access to good firewall so as opposed to routers.

11
00:00:57,020 --> 00:01:00,090
Most smart if not all of the firewalls

12
00:01:02,890 --> 00:01:08,170
come like blocked so no information is permitted to the firewall.

13
00:01:08,200 --> 00:01:16,170
So as in this case we have to permit to permit HTP access to the firewall as in the next step.

14
00:01:16,210 --> 00:01:23,230
We will have available as an option to connect to the K through a web based manager.

15
00:01:23,230 --> 00:01:29,270
Now let's take a look at how it looks in the in the way that works here.

16
00:01:29,530 --> 00:01:36,610
So it's fine for good execs Borski and it's up going to the console.

17
00:01:36,610 --> 00:01:44,840
We see now the last one for and for Kate comes with the admin has a user name and no passport.

18
00:01:44,840 --> 00:01:52,150
So we just hit enter and we have the banner the welcome exclamation mark.

19
00:01:52,470 --> 00:01:57,730
As I said we have now to declare the IPs resting on port 1.

20
00:01:57,810 --> 00:02:01,810
First of all we have to go to a complete system menu.

21
00:02:02,220 --> 00:02:10,410
So config system and interface allow it.

22
00:02:10,780 --> 00:02:17,610
And we said port one.

23
00:02:17,760 --> 00:02:21,350
OK so we don't have to put any spaces in one.

24
00:02:21,390 --> 00:02:24,220
This is good information.

25
00:02:24,240 --> 00:02:29,740
Now we have to set up the IP address so set IP.

26
00:02:30,150 --> 00:02:37,760
And in this case in this case I would just use an IP that's suitable for my lab environment.

27
00:02:40,740 --> 00:02:46,010
1 7 so that 27 to 155.

28
00:02:46,380 --> 00:02:47,520
And the something that mask

29
00:02:50,410 --> 00:02:51,680
and that.

30
00:02:52,060 --> 00:02:56,910
Said we have a lot of answers to the PM to the firewall anyway.

31
00:02:57,090 --> 00:03:06,150
So let's do that said law and I just I don't know if you have noticed I said a lot in the past and the

32
00:03:06,320 --> 00:03:08,520
doing autocomplete said hello AXS.

33
00:03:08,550 --> 00:03:09,230
Let's see.

34
00:03:09,240 --> 00:03:11,670
What are the available options.

35
00:03:11,670 --> 00:03:19,980
So that is nothing is permitted so if you have if you want to have like ICMP connectivity between between

36
00:03:19,980 --> 00:03:29,410
these four and any other mental element in our area we would have to also allow things access ICMP.

37
00:03:29,600 --> 00:03:32,660
So it's being AGP Yes.

38
00:03:32,880 --> 00:03:33,680
Why not.

39
00:03:33,860 --> 00:03:41,860
Sensage and GTP are also good.

40
00:03:42,020 --> 00:03:45,860
Now second the VM has to have any IP connectivity.

41
00:03:45,890 --> 00:03:53,600
So to do so it will need some route is routing take it you have to know who is the default gateway where

42
00:03:53,600 --> 00:03:57,770
to send all the packets in case no specific routes are present.

43
00:03:57,980 --> 00:04:04,790
We have to set up a default gateway so that before we send all traffic to that gateway for this reason

44
00:04:05,080 --> 00:04:18,260
I just hit and by the way let's see if we work if we are in a menu like we were in counting system interface

45
00:04:19,300 --> 00:04:21,090
and we were doing port 1

46
00:04:25,830 --> 00:04:32,990
and as you can see we'll just exit the menu but also save the last config just that you know and we

47
00:04:32,990 --> 00:04:34,550
do the trick.

48
00:04:34,550 --> 00:04:39,540
Now setting the Folgate before the gate will enter the config.

49
00:04:41,370 --> 00:04:46,990
Kofi Radha type of round of study

50
00:04:50,010 --> 00:04:56,390
now what we have here available again you don't have to memorize things just have to go through then

51
00:04:56,460 --> 00:05:02,260
understand how they work and you will just retain information on long term basis this way.

52
00:05:02,910 --> 00:05:04,540
So we have to end it.

53
00:05:04,730 --> 00:05:09,370
So at a table then it's it's about the writing table now.

54
00:05:09,590 --> 00:05:17,130
So airy and sippers number any number as we have no other sequences or or any other entries just select

55
00:05:17,140 --> 00:05:17,900
let's say one

56
00:05:20,540 --> 00:05:23,940
said what options we have here.

57
00:05:24,730 --> 00:05:29,930
So we have the device so we enable the simple get out interface.

58
00:05:29,960 --> 00:05:33,980
It's self-explanatory and very simple so said device.

59
00:05:34,540 --> 00:05:36,840
And we were editing part 1.

60
00:05:36,970 --> 00:05:41,700
So we will just select one here and Brin

61
00:05:44,910 --> 00:05:47,180
said just one question mark.

62
00:05:47,220 --> 00:05:53,540
So the the the sealife it's basically waiting for an IP address from our site.

63
00:05:53,760 --> 00:06:01,260
Again just configure what's what's suitable for your for your network for your live environment anyway.

64
00:06:01,290 --> 00:06:01,970
It's the same

65
00:06:04,840 --> 00:06:12,060
and again now to exit the configuration the configuration menu and also save the config.

66
00:06:12,100 --> 00:06:13,060
We just have to keep

67
00:06:17,390 --> 00:06:22,110
Let's see if we have connected to the.

68
00:06:22,280 --> 00:06:30,050
So I'm in my computer now and I will see if everything is OK.

69
00:06:30,080 --> 00:06:37,000
So I said that 145 and yes we have connectivity.

70
00:06:37,140 --> 00:06:41,210
Let's see an hour as I provide for you before the gate.

71
00:06:41,400 --> 00:06:49,470
So it means that all the baggage it will be sent to the phone if it has any internet connectivity.

72
00:06:49,500 --> 00:06:56,820
So for 40 years we have to execute and question once we have a lot of options you can see we have also

73
00:06:56,840 --> 00:07:04,510
ping executed ping and use let's say Google excellent.

74
00:07:04,570 --> 00:07:06,940
We have connectivity so everything is fine.

75
00:07:07,200 --> 00:07:15,800
So at this point we have fulfilled successfully the two points that we had available in the in the slides.

76
00:07:16,020 --> 00:07:24,450
The last thing that we have we have to conclude and this session is connected to HTP the graphical user

77
00:07:24,450 --> 00:07:28,880
interface for the Fortunat perfect.

78
00:07:29,070 --> 00:07:33,310
So is it that we also have AGP connectivity.

79
00:07:33,780 --> 00:07:36,560
We said we have no password and hit enter

80
00:07:44,250 --> 00:07:46,320
Yes it looks like everything is fine.

81
00:07:46,320 --> 00:07:53,840
We have collected the 48 VM 64 image and now we can't just move to the next module.

82
00:07:53,950 --> 00:07:55,060
So C plus.