Lab Solution Troubleshooting Group Policy Infrastructure Scenario.
After configuring settings for the research department in computers in the conference rooms, you want
to make sure that all settings apply as intended.
You want to do this by creating our soap reports from both group policy management console and the client.
You do not have access to a computer in the conference rooms, so you have to simulate how settings
will apply by using group policy modeling analyses.
You want to investigate what events are stored in event viewer regarding group policy.
After some time you receive a helpdesk ticket opened by a user.
The issue is that the screen saver settings that was applied is not the correct settings for the user.
You have to investigate the issue and make sure that the correct settings apply to the user.
Exercise one.
Verify GPO Application.
Task one.
Perform our soapy analysis.
One.
Switch to elo NCL one.
And then verified that you are signed in as a date and backslash.
Connie.
If necessary, use the password to click start.
Type cmd and then press enter.
Three at the command prompt typed the following command and then press enter update slash force.
Four.
Wait for the command to complete.
Make a note of the current system time which you will need to know for a task later in this lab to record
the system.
Time.
Type the following command and then press.
Enter.
Twice.
Time.
Five.
Restart elo ncl one.
Wait for elo ncl one to restart before proceeding with the next task.
Do not sign in to elo ncl one six switch to low end DC one seven switch to group policy management console.
Eight in the navigation pane if necessary, expand forest a data cnn.com and then click group policy
results.
Nine Right Click Group Policy Results and then click Group Policy Results Wizard.
Ten On the Welcome to the Group Policy Results Wizard Page Click next.
11 On the computer selection page, select the another computer option type L0 and C L1 and then click
next.
12 On the user selection page, click a data and backslash, Connie, and then click next.
13 On the summary of selections page review your settings and then click next.
14.
Click Finish.
The RCMP report appears in the details pane of group policy management console.
15.
Review the summary results for both the user and the computer configuration.
Identified the time of the last policy refresh and the list of allowed and denied.
GPOs identify the components that were used to process policy settings.
16.
Click the details tab.
Review the settings that were applied during user and computer policy application and then identify
the GPO from which the settings were obtained.
17.
Click the Policy Events tab and then locate the event that logs the policy refresh that you triggered
with the update command.
18.
Click the summary tab.
Right.
Click an empty space on the page and then click Save Report.
19.
In the navigation pane, click desktop and then click Save.
20.
On the desktop right click KANI on clone seal one dot FTM point two Open with and then click Internet
Explorer 21.
When you have examined the report.
Close Microsoft Internet Explorer task to analyze our soapie with a result.
One sign into l.o ncl one as a datum backslash Connie with the password to right click start and then
click command prompt.
Three at the command prompt typed the following command and then press enter GP result slash r.
For our soap summary results are displayed.
Notice that the information is very similar to the summary tab of the RCP report that was produced by
Group Policy Results Wizard.
Five At the command prompt.
Take the following command and then press enter GP result slash v more six.
Press the spacebar to proceed through the report.
Notice that many of the group policy settings that were applied by the client are listed in this report.
Seven at the command prompt typed the following command and then press enter GP results slash z more.
Eight Press the spacebar to proceed through the report.
This is the most detailed r soap report.
Nine at the command prompt typed the following command and then press enter presold slash h percent
user profile percent backslash desktop backslash support HTML and r soapie report is saved as an HTML
file to your desktop.
Ten.
Open the saved our soapy report from your desktop.
Compare the report, its information and its formatting with the are soapy report that you saved in
the previous task.
11.
Sign out of Ello and seal one.
Task three.
Evaluate GPL results by using group policy modeling Wizard one on yellow and DC one in group policy
management console in the navigation pane Click Group Policy Modeling to right click group policy modeling
and then Click Group Policy Modeling Wizard.
Three.
In Group Policy Modeling Wizard Click next.
Four.
On the domain controller selection page, click next.
Five On the user and computer selection page in the user information section, select the user option
and then click browse in the select user dialog box, type Karni and then press enter.
Six In the computer information section, select the computer option and then click browse in the select
computer dialog box, type Elmo and SEAL one and then press enter.
Seven In Group Policy Modeling Wizard Click Next.
Eight On the Advanced Simulation Options page, select the Loopback Processing CheckBox and then select
the merge option.
Even though the conference room settings GPIO specifies loopback processing.
You must instruct group policy modeling wizard to consider loopback processing in its simulation.
Click next.
Nine on the alternate Active Directory paths page next to computer location, click browse ten in the
choose computer container dialog box, expanded datum, expand kiosks and then click conference rooms.
You are simulating the effect of elo NCL one as a conference room computer.
Click okay and then click next 11 on the User Security Groups page.
Click next.
12 on the computer security group's page.
Click next.
13.
On the WMI filters for users page click next.
14.
On the WMI filters for Computers page click next.
15.
Review your settings on the summary of selections page click next and then click Finish.
16.
In the details pane, click the details tab if necessary, expand user details, expand group policy
objects and then expand.
Apply GPOs 17.
Verify at the conference room settings.
GPL applies to Kahney as a user policy when she signs into L1 C, l1 if l1 c, l one is in the conference
rooms.
O.
U.
18.
Scroll to and if necessary, expand user details, expand settings, expand policies, expand administrative
templates, and then expand control panel.
Slash Personalization.
19.
Confirm that the screen saver timeout is 7200 seconds 2 hours.
The setting configured by the conference room settings GPO that overrides the ten minute standard configured
by the A Datum Standards GPO Task for review policy events.
One.
Switch to L0 and seal one.
Sign in as a data backslash administrator with the password to right click start and then click event
viewer.
Three in the navigation pane, expand windows logs and then click the system log four click the source
column header to sort the system log by source.
Five.
Locate Event 1500 1501 1502 or 1503 with group policy is the source six.
Review the information that is associated with group policy events seven.
In the navigation pane.
Expand applications and services logs, expand Microsoft, expand Windows, expand group policy and
then click operational.
Eight Locate the first event related to the group policy.
Refresh that you initiated in the first exercise with the update command.
Review that event and the events that followed it.
Nine Sign out of ELO and see one exercise two Troubleshooting GPOs you task one read the helpdesk incident
record and simulate the problem.
One Read Helpdesk Incident Record 604531 in the exercise scenario.
Two on low and DC one on the taskbar click file explorer.
Three in file explorer to the script location four in the details pane right click mod 05-1.1 and then
click run with PowerShell if prompted press y and then press enter.
Task to update the Plan of Action section of the incident record one Read the additional information
section of the incident record in the exercise scenario in the Student Manual to update the Plan of
Action section of the incident record in the Student Manual with your recommendations.
Verify the configuration for Connie Vaughn are so p from group policy results Wizard will afterward
provide the configuration information for Connie Vaughn.
The research application override GPIO should provide the correct configuration.
Investigate the configuration of the GPIO Task three.
Troubleshoot and resolve the problem one on l0 and C L1.
Sign in as a data backslash kani with the password to right click start and then click control panel
three In Control Panel Click Appearance and personalization and then click change screen saver.
Four verify that weight is dimmed and has a value of 10 minutes.
Five.
Sign out of elo ncl one.
Six.
Switch to ELO and DC one.
Seven.
In the group policy management window in the navigation pane.
Click Group Policy Results.
Eight.
Right click through policy results and then click Group Policy Results Wizard.
Nine.
On the Welcome to the Group Policy Results Wizard Page.
Click next.
Ten.
On the computer selection page.
Select the another computer option, type L1, C L1 and then click next.
11 on the user selection page, click a date and backslash, Connie and then click next.
12 On the summary of Selections page.
Review your settings and then click next.
13.
Click Finish.
14.
Click the details tab and then click show all 15 in the User Details section.
Locate the settings section and then in control panel.
Slash personalization.
Verify that the screen saver time out is 600 seconds and the winning GPIO is a datum standards 16.
In the user details section, locate the denied GPOs and verify that the research application override
GPO is in the list of denied GPOs with a reason of disabled link.
In this case, it appears that the GPIO link for the research OAU is disabled.
17.
In the navigation pane click the research oyu right.
Click the research view and then click refresh.
18 Expand the research EU 19.
Notice that the link for the research application override GPO is disabled.
In the navigation pane, right click the research application override GPO and then click link enabled.
20.
Switch to elo ncl 121.
On ELO ncl one.
Sign in as a date and backslash.
Connie with the password.
22.
Right click start and then Click Control Panel 23.
In Control Panel Click Appearance and personalization and then click Change.
Screensaver 24 Verify that weight is no longer dimmed and has a value of 1 minutes.
25 If weight is still dimmed, then perform the following steps a right click start, hover over shutdown
or sign out and then click restart.
B Sign in as a date and backslash Karni with the password c perform steps 22 to 2426 sign out of ELO
and seal one.