I know everyone that I have that here again and love Number Two Of course I'm going to configure the
Michael Carter to act as a DCP server then I will dig Inside Edition picture of the mikes that are out
there and we can see the features that are available there.
And then I will show you also what can you do more when you configure the router as it does to the server.
So as you can see here we have a 14 box to do list that first check what is the last scenario.
And then I will come back to the parts and start doing them one by one.
So that is our option.
I have my computer connected to Internet Two of the router that I'm going to name it should be server.
So this router is going to be the DCP server for me.
And then what I'm going to do I have to put it in at two and Ethernet three together in a bridge.
OK.
A bridge interface.
That means I'm bridging both interfaces together.
They will be represented.
It's like one interface.
OK.
And then on this bridge I'm going to create a secure server.
So I'm going to make this server on this interface and then I'm gonna create of course the pool and
the settings of the server in order to give them all settings or Dols configuration to the host that
are requesting to get I gather from the server and then I'm going to check if this pc will get an IP
address.
And of course the subnet mask the gateway and DNS that I have configured on the DCP server that's one
on.
And then after that I'm gonna put here a router.
All right I'm going to plug the router which is about to do two ethernet three.
And then I'm going to make some configuration on the server to allow route other than the gateway that
is normally given.
So another route would call that classless route so that in this case this router over here will receive
from the district the server also allow the glassless route and then I'm going to show you how you can
do that using the options that are available on the server.
So that is basically what you are going to do in this lab.
Let's go now and start doing the lap on Bible Belt number one to create the bridge interface and put
the board into that too.
And Ethernet 3 on this interface.
So I'm just putting out the picture of the lab.
And let's go directly to the router and putting those two devices in a bridge.
So I go to Winbox and I see that it is the router it has no any conflagration on it now I connect with
the Mac address and then I love it and so with and here I have to create a bridge interface so that
this Debrett interface on my class and then inside this rigid interface I'm going to put the ports which
are eaten at two and three OK I got disconnected because I was connected to Internet to and internet
to came to the bridge.
Now I reconnect again and then output.
Now it's the three.
So now I have even had two.
And either that three that means that it 2 which is connected to the PC and Internet 3 which is connected
to the other router they are both inside a bridge interface.
That means they are like one interface.
At this moment and then I'm going to create a recipe server on that interface.
But before I finish this part let me just change the name of this router.
I will give it another name to go to identity and from here I will name it the city sir.
All right.
So now we can see the name over here.
It has changed to the SPCA number one has done both number two.
And I gathered on the bridge interface of one line to say that one to fight for it.
So now we created the bridge interface we need to put an icon on that bridge interface and then we create
the server of course to have a DCP server you need to have on the interface that you are creating.
There should be all that you need to have an IP address so we go now to IP and then to address and here
they said make the IP address to be checked again one or two and say that one to the 5:4.
So it's 1 9 2 1 6 8 1 2 2 5 4.
Don't forget to put Rush 24 down.
And then this is going to be on the bridge interface bridge one part number two is done.
Point number three go to IP then there should be server and click on they should be set up on the bridge
interface and follow the wizard.
So on this point I'm going to start configuring the there should be server on the bridge interface that
I have just great.
So let's do that we go to emboss we've got to IP DSP server.
And then he would have to click on this to be set up and now we start doing the wizard.
Well it's got to be the Sep 7 on which interface we said is going to be on page 1 and that is key because
it's Ridwan.
It will check what are the range of IP addresses that are going to be the least of which is what is
the the network.
Actually it's one I want say that 1.0 because we have put on the interface one to one I don't want to
fight for.
So I'll say yes next and that the one that the gateway to be one I don't say that one the two by four
that means that all the users who want to get IP addresses all Haast that they want to get.
I gather from the JCP server they will have a gateway which is one or two and say that 1 2 2 5 4 which
is the IP of the bridge and now yes I should say here next and the IP address is going to be from and
here they said from one night to say you don't want the 1 2 1 2 2 5 3 that will say OK that's fine x
and DNS is put here are they pay it I will just give them the DNS off Google and then I will say X and
the list time here I would keep it as default next.
And that's it.
So now what I have done I have recreated the recipe server and you can see here there is the network
is going to be from the one that are second 1.0 and this is the gateway and that is the DNS.
And if we look now if we go to IP and then we go to pool and then you can see this is the pool that
has been created from one that wants to that one that one on one I don't say that 1 2 5 3.
Now if you want to have another pool so you can add here.
So if you say those IP addresses have finished you want to create another pool you can add them here
also.
All right.
Number three is done but not before.
Go to your PC and let it obtain IP address automatically.
So now I have to go to my settings on my computer.
Let's check we go here to network and sharing chapter.
And then I'll have to go to the my adapter which is here propertys and to the IP protocol version 4
we see that we have already here Manulife others.
If we say up then I like the others automatically and are also DNS automatically and I will say.
OK.
And now we need to check if it will get an IP address.
And let's see now.
If I go I'll close the inbox.
I go to the common prompt now.
And from here I have to say I'd be Gun-Free slush all you can see in the he has received that I try
to make it bigger now.
Yes this interface got tonight but there's one at the 168 that wanted to fly three.
And this is the gateway.
This is the day 67 which is one to four.
And also the DNS which is over here.
So that means that now that the server is working at least an IP address to this computer and if you
want we can now go back to the Winbox.
So let's go to Winbox again.
And now I don't have an IP I can connect directly to the routers on the IP address and if I go now to
IP there should be server and we go to these we can see that it has this IP to my computer so you can
see that here what not before is done what number five did your PC get.
And I gather this and others from the day should be served.
Yes I've checked that.
That's fine.
Now get another Mike that router with no config and connect it to connect the internet to or do it in.
Actually here should be from that's true or it honestly doesn't matter.
But in my picture I put it in a 3 so we can make this one Internet story for demand.
OK.
So let's do that.
I have now another router here and I'm going to connect now it's bought it and it's free to the ministry
of demand.
So I put it here on the internet three.
OK so this is done.
Number six is Don now on demand that either go to IP.
They should be server then option.
So that's something maybe you haven't seen it before.
And that's what I wanted to explain to you about it.
The options are very important.
On the distribution of or on market.
So if you go now to IP and we go to this server and we go to option.
So what are the options.
Actually every settings that the server is giving.
It does have a value as an option.
OK.
So for example if I want to show you if we go now to the rather and we go here.
Actually I don't have Internet now to show you but I open my Internet possibly just to show you about
that about the DSP options.
Ok now I'm connected to the Internet and if I tried to see the options.
OK.
And we can look here about the options that are available on the DSP server.
So if we scroll down here you can see that the subnet mask has an option 1 The server has option for
the domain name has option number 6 and so forth.
So you can see that that you have a lot of options you can provide with the DCP server to the house.
And what I'm going out to do I'm going to work on this one which is option 121 which is glassless the
static route option.
That means that the router will as they should be Schobel will give you all the information that you
have already.
Now set all your settings when you were configuring it to the server.
Plus he will give also glassless a static route option.
That means it will give a route that is going to be shown now on the router that I'm going to connect
or I have already connected to the mike the up so that router will have the options from the DST server.
The settings that we have configured so the range might be from 181st that are want something the subnet
mask the gateway the DNS Plus it will receive also en route.
Now across the south and then by using the option number one.
Twenty one if you want to use other options you can.
OK but for this I'm just going to show you how you can configure the option 121.
All right.
So let's do that.
Number seven is done we are on site options and then put the code 120 on and the value you can see it's
a hexadecimal value.
And this will represent network 1 then 39 0 0 or 16 and gateway then 38 were on the phone.
What does it mean here.
Actually it means the following.
If I go back to the picture here when I'm going out to a router too.
OK.
So that is za'atar too.
I'm going to make this interface to receive an IP address from the DCP server so it will receive all
the information that we have said.
Plus it will receive a rollout.
OK.
And this Strout say that if we go back here that if you want to go to 10 that said the 9 0 0 size 16.
So if you want to go to 10:39 the 0 0 slash 16 then you have to go to the IP address then that's sort
of the a the one that one just those numbers are those like addresses are now just there and putting
them anything OK.
If you want to give them an IP they classless that static up which is going to work for for this long
that me the router can use it.
Then you should change the value of the hexadecimal and why I'm saying that because they had so decimal
that I have here Zero X that means X you know then that the first one the first part.
Let me copy it and then I put it there.
And then I will explain to you why we need to put this one.
So here and I based it here.
OK.
If I open the calculator I make the calculator now here and this is the programmer calculator.
So you actually means hexadecimal.
Then the first thing here then that's the because we're saying here 60 and that's the something that
masker OK.
So when you write here 16 on this you know.
So you look here on hexadecimal.
That's then.
So that's the first part here.
Faster than 0 a 27.
This means that you have the first two octave because 16 is 2.5 to 5 5.
That those are reserve and how to check that.
Let's try to see on the calculator if I show you then on this and I'll get you here on hexadecimal is
a.
That means zero A.
And then if I make certain nine thirty nine on this you know me is to 7 on hexadecimal can see here
2 7.
So this me 39 and that's what it shows here a to z.
Sorry 0 8 2 7 0 8 2 7 means that's 39.
And the rest here this part zero.
A 2 6 0 1 is the one that represents the gateway which is this one.
All right.
So if you want we can also try to do with on the calculator then means hey that's 0 a 30.
Means to 6 so you can see 2 6 on the exit.
1 means 0 1.
And of course one means you know one.
So this hexadecimal represent the the format of action.
So this will represent the class the Shruthi crowd that I'm going to injected to the market example
which is off to from the DST piece.
So that's why you need to write this hexadecimal so.
Now they told us to make it let's go to the doctor.
And inside the IPD to be sure we have option and then I have to make plus.
The goal here because it is a class less static.
And remember when we were checking we've seen that the gold Audubon's should be 121 121 and then de-value
here we have two right.
The one that we have just seen now how to convert from the original to the hexadecimal.
And then I would say apply OK against the robot you showed that I did it over.
So when you say that code is 121 that means it is a classless static route that I'm going I injected
with the server so that I will say.