
    README file for HID Global OK 5427 CK PC/SC Device Driver, Version 1.0.0.14
    Copyright (c) 2012 HID Global Corporation


This document describes the release notes of the 
HID Global OK 5427 CK PC/SC Reader Driver
====================================================




I. General
**********

Supported Operating Systems:
----------------------------

This driver supports the operating systems
Windows XP Professional x64 Edition
Windows Server 2003 Standard x64 Edition
Windows Vista x64
Windows Server 2008 x64 Edition
Windows Server 2008 R2 x64 Edition
Windows 7 x64 Edition

on Intel 64 and AMD 64 bit systems.

The installation of the driver is done by Plug and Play under all operating systems.




II. New Installation:
*********************

Plug the HID Global OK 5427 CK Reader into a free USB port.

A 'New Hardware Found' dialog box will appear and you will be asked to select the directory where the driver files are stored.




III. Updating:
**************

Step By Step Instructions To Update The Driver:
-------------------------------------------------------------------

The newest driver versions are always available under http://www.hidglobal.com.

The files on this web page are selfextracting archives, which are extracted by doubleclicking the downloaded .exe file.
Please keep the directory structure for extraction.


Step 1:
-------

Download the drivers for your HID Smart Card Reader from http://www.hidglobal.com.

Change to the directory where you have stored the downloaded file.

Doubleclick on the downloaded InstallerPackage file.


The driver will be pre-installes by the installer package.
 
If the driver are not pre-installed -> please follow step 2


Step 2:
-------


Click on 'Start' --> 'Control Panel', doubleclick on the 'Systemicon', the 'System Properties' window appears.
Click on the 'Hardware' Tab-Sheet and then click on the 'Device Manager' button.

Click on the '+'-sign on the left side of the Smart Card Readers-entry to display all installed smart card readers.
Then click on the 'HID-CCID Smart Card Reader' entry with the right mouse button and click on the 'Update Driver...' entry in the appearing context menue.

The 'Hardware Update Wizard' window appears. AT the Windows Update search selection select 'No, not this time' and klick 'Next'. select 'Install from a list or specific location (Advanced)' and click 'Next' to continue.

Select 'Don't search, I will choose the driver to install' and click 'Next'.
Click on the 'Have Disk...' button.

In the 'Install From Disk' window click on the 'Browse' button and select the '*.inf' file in the directory where you have unpacked the downloaded file and click 'Open'.

Verify that the correct path to the file is shown in the 'Copy manufacturer's files from:' window and click 'OK'. Click 'Next'.

After Windows has copied the driver files a message appears that the software for the listed device has been installed. Click on the 'Finish' button and close all the windows which are not needed anymore.

Now the HID Global Smart Card Reader is ready for use.



IV. FCC Information:
********************
IMPORTANT SAFETY INSTRUCTION! CAUTION - USE THIS DEVICE ONLY WITH LISTED PERSONAL COMPUTERS


V. What is new in this release ?
*********************************
- new HID OK 5427 CK Reader now supported


Release date: 03/23/2012

-------------------------------- END OF FILE -------------------------------
