# mar/13/2025 11:18:23 by RouterOS 6.49.18
# software id = KXCC-CEVD
#
# model = RouterBOARD 941-2nD
# serial number = 661605935858
/interface bridge
add fast-forward=no name=bridge1
/interface ethernet
set [ find default-name=ether1 ] advertise=\
    10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full
set [ find default-name=ether2 ] advertise=\
    10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full
set [ find default-name=ether3 ] advertise=\
    10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full
set [ find default-name=ether4 ] advertise=\
    10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full
/interface wireless
set [ find default-name=wlan1 ] antenna-gain=0 band=2ghz-onlyn channel-width=\
    20/40mhz-eC country=no_country_set disabled=no frequency=auto \
    frequency-mode=manual-txpower mode=ap-bridge rx-chains=0 ssid=Mohsen \
    tx-chains=0 wps-mode=disabled
/interface wireless security-profiles
set [ find default=yes ] authentication-types=\
    wpa-psk,wpa2-psk,wpa-eap,wpa2-eap mode=dynamic-keys supplicant-identity=\
    MikroTik wpa-pre-shared-key=0110003217009 wpa2-pre-shared-key=\
    0110003217009
/ip ipsec proposal
set [ find default=yes ] enc-algorithms=aes-128-cbc
/snmp community
set [ find default=yes ] addresses=0.0.0.0/0
/interface bridge port
add bridge=bridge1 hw=no interface=ether1
add bridge=bridge1 hw=no interface=ether2
add bridge=bridge1 hw=no interface=ether3
add bridge=bridge1 hw=no interface=ether4
add bridge=bridge1 interface=wlan1
/ip address
add address=192.168.1.2/24 interface=bridge1 network=192.168.1.0
/ip dhcp-client
add disabled=no interface=bridge1
/ip route
add distance=3 gateway=192.168.1.1